How To Set Up A New Router Linksys

Download Article

Download Commodity

Are you lot having trouble getting your Linksys WRT160N router to connect to the net? Here are some steps to help y'all configure it.

Steps Download Article

1. 1

   Connect to the router. Use an ethernet cablevision, and plug your calculator into the router. Then turn on the router and connect to information technology using a web browser such as Internet Explorer or Firefox. This is done past typing the IP accost of the router. Linksys sets the default to http://192.168.1.one/

2. ii

   Enter your information. If this is your offset time setting it up, yous volition exist asked for your credentials. Leave the username blank and enter "admin" for the password.

   Advertisement

3. three

   Basic setup. You will now be in the "Bones Setup" section of the router. You may decide what the Routers IP will be going forward. If yous are unsure, leave it as the default 192.168.ane.i. You may as well set the Time Zone for your area.

   • You lot also might need to clone the Mac accost if yous are using Cable Broadband (Broadband from the pay TV cables). To do this, get to "Mac accost clone," then "Enable," then "clone my computers Mac."

4. 4

   Continue to the Wireless tab. Notice that the configuration has two options: Manual or Wi-Fi Protected Setup. Select the manual radio push button. Here you will give your network a name or SSID (Service Set Identifier). This is the name that people volition see when trying to connect to your router. Exist certain apply a name that does NOT place y'all or your family.

   • Set the Channel Width to xx MHz merely and disable your SSID (wireless network) broadcast unless y'all have a need to advertise your wireless network. Click "Save Settings."

5. 5

   Click the Wireless Security link. Here is where you can gear up the security for the wireless portion of your network. It'southward recommended you choose the strongest encryption method your devices can use. WPA2 Personal is the best. With this encryption, you will choose a pass phrase that will be used by all the wireless devices that y'all let to admission your wireless network. This is not information y'all should be sharing. A pass phrase of 22 characters (including spaces) is recommended.

   • The advanced security link can exist ignored unless you lot are having range, signal or transmission problems. On this folio, in that location is a "Aid" feature in the router. It is strongly recommended y'all read and sympathise all information before making any changes to the listed defaults.

6. half dozen

   Select "Access Restrictions." This would be done if you would like to add together further security for children or other users on your network. On this folio, you volition find many options which permit you to restrict access past day, hour and personal computer. Yous must add together the computers that will be restricted past clicking on "Edit List" and calculation the computers by IP address, and then selecting which day and hour past clicking on the bank check boxes. For the more than advanced user, you may block specific applications such equally Telnet and POP3 (email).

7. 7

   Employ the Applications and Gaming tab. This should exist washed if you will use the cyberspace for applications requiring port forwarding such every bit video games or torrent downloading software. To forward a specific port, you must enter it in the External Port and Internal Port and and then put the IP address of the specific calculator needing the ports in the specified slot. You may also frontwards a range of ports by using the Port Range Forwarding sub-tab. Remember to save after every change.

8. eight

   Set a router password on the Administration tab. This password will be entered to make configuration changes going forrad. Enter the wanted countersign into both Router countersign slots. Exist sure to disable the Spider web Utility Access via the "wireless feature" button. You lot don't want to be wirelessly configuring the router.

   • Select "Disable" for Remote Management as you don't want to exist configuring your router from public Internet. Disable UPnP as there are vulnerabilities with this characteristic. Click "Save Settings."

9. nine

   Click the Status tab to verify connectivity and router status. This folio contains the information given past your Isp (Internet access provider), such as the DNS address and the Domain Proper name. You may also click on the Local Network tab to verify the DHCP Client Table, which contains all users continued past cablevision or wireless to your router. This tin be used to verify if someone is connected to your router that should not exist.

   Advertisement

Add New Question

• Question

  What do I exercise if I have forgotten the password and username?

  

  You tin practice a factory reset on the unit by powering it off, property down the reset push with a pen or other pointed object, and holding downwardly for most fifteen seconds while you ability back on. Note that this will restore the settings to those when it was new, so all previous configuration will be lost.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertizement

• You may have to reset your Router to manufactory settings by pushing a pin in the small-scale hole in the dorsum of the router (while its powered up).

• Remember to salvage after every modify.

• When setting up a router for the first time, refer to the manual and utilize whatsoever installation CDs that come with information technology.

Thanks for submitting a tip for review!

Ad

• Practice not upgrade the firmware of the router unless you know what you are doing. This may cause the router to stop operation permanently.

Ad

Things Yous'll Need

• Modem
• Router
• Computer with NIC card
• Ethernet cables

Almost This Article

Thanks to all authors for creating a page that has been read 541,016 times.

Is this article up to date?

How To Set Up A New Router Linksys,

Source: https://www.wikihow.com/Configure-a-Linksys-WRT160N-Router

Posted by: ornelashavoily.blogspot.com

Share this post